Bosch Fiber Interface - Non-Addressable

The network splitter is used in a network to provide two branches from the main cable run. It can use an external DC power supply, or it can use the power supply from the network controller. The unit automatically switches to the local power supply unit when it is connected to it, reducing the power drain on the main network. The network splitter can also function as a repeater, effectively extending the length of the main network another 50 meters.

Features:

• Redundant network connection
• Indicators for power and fault status
• Two supervised control inputs (not PRS‑FINNA)
• Can use a local power supply

Specifications:

• Power consumption: 4.6W DC
• Voltage: 24 to 56VDC, 48VDC nominal
• Current: 2.5A maximum (5A peak <2 s)
• Control inputs: 2 x
• Connector: Screw terminals
• Operation: Closing contact (with supervision)
• Connector: SC (Avago AFBR-5803Z transceiver)
• Wavelength: 1300nm
• Cable type: 62.5 / 125μm or 50 / 125μm multi‑mode
• Dimensions (H x W x D):
  • Without bracket: 1.1" x 9.6" x 3.1" (27mm x 243mm x 80mm)
  • With bracket: 1.3" x 9.6" x 3.3" (34mm x 243mm x 84mm)
• Weight: 1.5 lbs (0.7kg)
• Mounting: Bracket (2 screws)
• Color: Charcoal
• Operating temperature: -5 ºC to +55 ºC (+23 ºF to +131 ºF)
• Storage temperature: -20 ºC to +70 ºC (-4 ºF to +158 ºF)
• Humidity: 15% to 90%
• Air pressure: 600 to 1100 hPa

Data_Sheet_97201_File_1.pdf