Bosch Network Cable - 100m (Connectors Not Included)

Cable couplers, each coupler is used to connect 2 Praesideo network cables in series to increase the length to 30m maximum (set of 10 pieces).

This is a special cable with two plastic fibers for data communication and two copper cores for the power supply.

The cable is 100m long, and comes without network connectors. LBB 4417/00 connectors are fitted after the cable has been cut to the required length. It connects the network controller to power amplifiers, audio expanders, call stations etc.

Specifications:

• Electrical:
  • Wire: Copper, stranded 1mm^2
  • Resistance: <0.018 ohm/m
• Optical:
  • Fiber: PMMA, 1mm
  • Numeric aperture: 0.5
  • Attenuation: <0.17 dB/m @ 650nm
  • Bending loss: <0.5 dB (r = 20mm, 90°) JIS C6861
• Mechanical:
  • Dimensions (diameter): 0.28" (7mm)
  • Color: Black
  • Pull force: 150 N (max)
• Environmental:
  • Operating temperature: -40 °C to +65 °C (-40 °F to 149 °F)
  • Humidity: 15% to 90%
  • Air pressure: 600 to 1100 hPa
• Certifications and Approvals:
  • Safety: acc. to IEC 60065 / EN 60065
  • Immunity: acc. to EN 55103‑2 / EN 50130‑4 / EN 50121‑4
  • Emissions: acc. to EN 55103-1 / FCC-47 part 15B
  • Emergency: acc. to EN 60849 / EN 54‑16 / ISO 7240‑16
  • Maritime: acc. to IEC 60945
  • Flame retardant: acc. to IEC 60332-1 60s
  • Halogen level: acc. to IEC 60754-2 pH >4.3, conductivity <10 uS/mm
  • Smoke level: acc. to IEC 61034-2 light transmission >60%
  • Certifications: CE, GL

DOES NOT INCLUDE CONNECTORS