Clear-Com FS II Digital Wireless Base Station X5

FreeSpeak II Digital license-free wireless base station. Supports up to 25 Beltpacks and 10 antennas. (Two antennas can connect to the base station directly or up to 10 antennas can be connected by using two x FSII-SPL splitters) The base station has connections for four party-lines and four 4-wires plus a dedicated SA output and dedicated program audio input. XLR-5 pin female headset connection. To use the fiber connections to the FSII-SPL Splitter please choose suitable SFP transceivers from either HLI-MMFO or HLI-SMFO.
Please note: SFP modules can vary in electrical capabilities despite being mechanically compatible. Clear-Com can only support Clear-Com supplied SFP transceivers which have been tested with Clear-Com products.

Features

• Routing and configuration of up to 25 FSII beltpacks
• Browser-based configuration tool
• Four 2-wire ports with call signal, auto-nulling
• Four 4-wire ports with call signal
• One dry contact relays
• Multi-mode user interface with monitoring, setup and main station modes with assignable soft keys
• Dedicated front panel keys for remote mic kill, stage announce and all talk
• Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
• Matrix and partyline configurations support up to 12 channels and/orgroups

Specifications

• Base-to-Beltpack Frequency Response: 100Hz - 7.1kHz
• No. of Beltpacks per Base Station: 25
• No. of Transceiver/ Antennas Supported by Base: 10
• No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
• PC Programming Port: 2 LAN RJ45
• Relay Port: DB15, supports one relay assigned to the SA out
• Partyline A ,B,C,D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
• Partyline Power On/Off: A/B, C/D paired
• Partyline Output Voltage: 26 - 28VDC, 850mA per pair (A/B or C/D)
• Four-Wire/Matrix Connection: 4 RJ-45
• Program Input: XLR-3F, transformer isolated, line-level input
• Stage Announce Output: XLR-3M, transformer isolated, line-level output
• Front Panel Headset: 4-pin male and 5-pin female options
• Front Panel Displays: 4 OLED’s with encoders and assignable soft keys
• Front Panel Indicators: Antenna Status, Beltpack Status
• External Power Supply Connection: 12VDC
• Base Station Programming/Editing: Push-to-enter rotary encoder
• Dimensions (HxWxD): 1.75" x 19" x 10.2" (44 x 483 x 259 mm)
• Weight: 5.57 lbs (2.5 kg)