• Home
  • ETC 12 Pole 120V 3@ Breaker Panel with Control Processor (IQ12)

ETC 12 Pole 120V 3@ Breaker Panel with Control Processor (IQ12)

(0)No Reviews yet
SKU: ETC 7131A1011

If you add this item, you're only $149 away from free shipping! (Motor Freight Excluded)


ETC’s Sensor IQ Intelligent Breaker System provides mains-fed power distribution for up to 48 branch circuits in the industry’s most
compact footprint. Sensor IQ breakers combine high-inrush rated over current protection, switched power control, and power usage/breaker status reporting in a single device. With built-in station, sensor, DMX and TimeClock controls and Ethernet connectivity, plus optional 0-10V dimming, DALI output , contact inputs, and isolated ground bar for audio loads, the Sensor IQ integration opportunities are limitless.


  • Mains Feed: Three-phase 120/208V four-wire plus ground or single (bi) phase 120/240V three-wire plus ground
  • 12-, 24or 48-position breaker sub-panel


  • Hydraulic magnetic breaker with high inrush trip curve
  • 22kA SCCR (up to 65kA series rated with main breaker)
  • Freely mix one-, two and three-pole breakers up to 30A
  • Integrated air-gap relay switching
  • Integrated on/off/tripped and connected load feedback
  • No power required for handle operation at the breaker
  • Echo, sACN, DMX-512, TimeClock, or stand-alone control
  • Built-in EchoConnect power supply for up to 6 Echo stations/sensors and 5 output products

Built-in network interface provides:

  • Advanced control of relays over streaming ACN (sACN)
  • Measured energy usage reporting per branch circuit
  • Web UI for configuration
  • Available 0-10V, contact input or DALI control cards
  • UL924 LISTED emergency control bypass with load shedding

Regulatory & Compliance:

  • Breakers listed to UL 489
  • Enclosures listed to UL 67, UL 508, UL 924
  • Complies with ANSI DMX512-A standard
  • Complies with ANSI E1.31 streaming ACN standard

User Interface:

  • Graphical display
  • Button interface
    • 0-9 number entry
    • Up, down and back-arrow navigation with enter
    • Test shortcut for local activation of preset, sequence and set level overrides
  • USB interface for uploads of setup and software updates
  • Onboard Web UI for simple configuration and management


  • Enclosure constructed of 16-gauge steel finished in black, fine-textured, scratch-resistant powder coat paint
  • Removable outer panel includes integral locking door to limit access to electronics, breakers and local relay overrides
  • Full front access with no side clearance required
  • Removable covers for access to Class 1 and Class 2 wiring
  • Complies with California building code seismic zone four


  • Mains feed power input to support 120/208V three-phase four-wire or 120/240V bi-phase three-wire plus ground
  • Max current input: 100A at 12 circuits, 200A at 24 circuits and 400A at 48 circuits
  • Quiescent draw: <10W with relays at steady state
  • Optional isolation between chassis and equipment grounding
  • Short-circuit current rating: 22,000A or 65,000 Amps symmetrical 
  • Overloads occurs at 50 operations of 600% of rated current
  • Integrated current transformer

Breaker Panel Data Sheet

Ratings & Reviews

No reviews available

Be the first to Write a Review