Nady IRW-2PA IR PA Wireless Receiver
Details
IRS-2PA infrared receiver only. For IRW-2PA wireless system.
Features:
- Multi-functional wall hanging lockbox houses dual infrared wireless receiver,
- preamp, power amp, and transmitters with battery-charging holders for safe and
- secure charging and storage
- Master Treble and Bass controls, and a 35W RMS power amp, perfect for driving
- two 8Ω speakers or any number of small ceiling speakers
- Battery chargers with unique safety shut-down protection circuitry to detect reverse polarity, damaged batteries, or non-rechargeables
- Line of sight transmission with no interference from systems in adjoining rooms providing ultimate confidentiality and isolation
- Power on, IR reception, and battery charging status LED indicators
- 2 remote mount IR Sensors supplied, with 20 ft. and 35 ft. connecting cables and
- variable-position wall mounts; each sensor with a Multiple Array of Wide-Angle
- Infrared Sensitive LEDs
- UL approved AC/AC power supply
Specifications:
- Mode: Infrared Frequency Modulated
- Receiving channels: Dual channels A & B
- Carrier frequency: (Ch A) 2.0MH; (Ch B) 2.6MH
- Range (line of sight): Up to 50 ft. (15M)
- Audio frequency response: 60Hz~14KHz
- S/N ratio: >82db
- THD: 0.8%
- Aux Input sensitivity: 18mV
- Mic Input sensitivity: 280mV
- Bass control: +/- 12dB at 100Hz
- Treble control: +/- 12dB at 8Khz
- Speaker Output Power: 35W RMS @ 4Ω; 25W RMS @ 8Ω
- Controls: Power On/Off (inside panel); A and B Volume controls; Mic Input Volume; Aux Input Volume; Bass EQ; Treble EQ; Charging Selector Switch, Battery Charging Power Switch
- Connectors: 4 x IR Sensor Input coax jacks; Speaker Output dual spring clip; Aux Input 1⁄4” jack; Mic Input 1⁄4” jack; AC Power Input Jack
- Power Requirements: AC/AC Power Supply 24VAC 2500mA (UL Approved)
- Power Fuse: 2A 250V
- Dimension (H x W x D): 14.1” x 10.6” x 6.2” (358 x 269 x 157mm)
- Weight: 13.2 lbs. (6 kg)