54in. Earth Anchor with 4in. Helix 3/4in. ROD HG

Anchors are installed by simply turning the anchor into the ground, utilizing a turning bar placed through the anchor's forged eye. No Wrench Anchors can be installed by hand or by machine. Screw Anchors consist of a forged triple eye rod with an angled point, and a firmly welded helix. Ground Anchors are hot dipped galvanized to meet ASTM Specification A153, Class C for long resistance to rust.

Anchor requirements are site specific. Soil type should be determined to assure that the correct anchors are used. Seek professional guidance. Anchors must be installed at an angle of 45 degrees in the direction of the guy load. Failure to install within 5 degrees of alignment of the guy load will significantly lower strength. Capacity ratings apply to properly installed anchors only.

Specifications:

• Helix OD: 4"
• Length: 54"
• Rod OD: 3/4"
• Finish: Galvanized corrosion resistance
• Weight: 9 lbs.

Approx. Holding Capacities (see Soil Classifications):

• Class 5: 4,500 lbs.
• Class 6: 3,000 lbs.
• Class 7: 1,500 lbs.

Soil Classifications:

Class 5: Medium dense coarse sand and sandy gravels; stiff to very stiff silts and clays Saprolites, residual soils

Class 6: Loose to medium dense fine to coarse sand; firm to stiff clays and silts Dense hydraulic fill; compacted fill; residual soils

Class 7: Loose fine sand; Alluvium; loess; soil-firm clays; varied clays; fill Flood plain soils; lake clays; adobe; gumbo; fill