Blizzard Blok 1 IP LED RGBAW COB Battery Powered w/ Anyfi Wireless DMX

The Blok 1 IP fixtures all come fitted with a single high output 25W RGBAW 5-in-1 COB LED with a 60 degrees beam angle, and it goes anywhere light is needed thanks to its internal Intelion lithium-ion battery system. The battery can easily last 10+ hours per charge with normal use, or even 2.5 hrs at full light output. The life of the battery charge can be extended even further by setting the fixture output mode to High (100%), Middle (75%) or Low (50%).

This fixture features a solidly constructed, cast aluminum housing with heat sink to naturally dissipate any heat, so there are no fans inside. It also has a tempered glass lens and watertight internal gaskets which protect the light source, antenna, status LEDs, and the easy-to-use Micro OLED control panel with 4 touch sensitive electronic buttons.

Other remarkable features of Blok 1 fixtures include their many built-in preset colors + white color temperature settings, variable electronic dimmer & strobe, menu key lock, flicker-free constant-current LED driver, color calibration settings, and multiple 32-bit dimming curve settings.

This fixture has no DMX input or output jacks. For DMX control, it must be wirelessly connected using its built-in AnyFi wireless receiver. But users do however have the option to take control of the Blok 1 by using its optional wireless handheld IR remote control (sold separately.)

Features:

• Operating Modes: Standalone, Master/Slave, Color Preset
• DMX Channels: 5/6/8/11-channel DMX
• Protocol: USITT DMX-512
• W-DMX Receiver (Frequency Hopping Protocol)
• Skywire 6/7-channel Receiver Mode

Specifications:

• Duration (full on): 2.5 hrs.
• Charge Time: 5 hrs.
• Beam Angle: 60 degrees
• Luminous Intensity: 1,601 Lux @ 1M, 434 Lux @ 2M
• 1x 25W RGBAW 5-in-1 COB LED
• Width: 9.5” (240 mm)
• Depth: 4.8” (122 mm)
• Height: 7.3” (185 mm)
• Weight: 5.5 lbs (2.5 kg)