$page_name : product
Large screen
Medium Screen
Small Screen
Extra Small Screen

Doug Fleenor Preset 10 Architectural Console

Part Number:

This Item Ships FREE *
$503.33

Add to Cart

Doug Fleenor Preset 10 Architectural Console

The Preset 10 Architectural is a lighting control station capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console. Each preset can then be assigned a unique fade time, from 0 to 999 seconds. Presets are recalled by pressing one of the buttons. Systems can be created by using one or more stations and a power supply. The solid aluminum faceplate is designed to install over a standard single gang electrical box. Connections to the Preset 10 Architectural are power (2 wires) and DMX512 (3 wires). Power for the Preset 10 can be supplied from a variety of sources, including a 10V class 2 "doorbell" transformer.

The Preset 10 Architectural system can work in conjunction with a lighting console, automatically switching between preset and console control. When the console generates DMX the Preset 10 Architectural goes off-line. The console then operates normally. Upon loss of DMX from the console, the Preset 10 Architectural either returns to its pervious preset or holds the last look (jumper selectable). The Preset 10 system also comes in a portable version (model PRE10-P) that acts as a backup station for any DMX512 lighting console or as a stand-alone DMX512 preset console.

Specifications:

  • Connector: Phoenix Contact MSTB series 5 position two part terminal block (MSTB 2,5/5-ST-5,08)
  • Connector pin out:
    • 1 (C) DMX512 common
    • 2 (-) DMX512 data -
    • 3 (+) DMX512 data +
    • 4 (C) Supply common (internally tied to pin1)
    • 5 (V) Supply voltage "hot"
  • Input/Output Circuit: ESD protected EIA-485 transceiver (LT1785)
  • Indicators: Ten (10) green preset indicator LEDs; One (1) yellow Fade Time LED; and One (1) red Signal / Record LED
  • User controls: Ten (10) preset push buttons; (1) One recessed record push button; One (1) recessed fade time push button
  • Option Jumpers: For a single station installation all jumpers should be installed.
    • Installed:
      • JP1: Recording Enabled
      • JP2: Master Station
      • JP3: Architectural Mode
      • JP4: Single Station Mode
    • Removed:
      • JP1: Recording Disabled
      • JP2: Slave Station
      • JP3: Portable Mode
      • JP4: Multi-Station Mode
  • Power input: 9 to 24 volts DC or 10 to 16 volts AC / 200mA per station. A 10V class 2 "doorbell" transformer is recommended for fixed installations.
  • Color: Black anodized with silver engraved nomenclature
  • Size:
    • Faceplate (H x W x D): 4.5" x 2.75" x 0.2"
    • Faceplate rear inset (H x W x D): 4.05" x 2.4" x 0.1"
    • Electrical box minimum inside dimensions (H x W x D): 3.5" x 2.1" x 1.25"
Overview:

Related Items & Accessories


Customers Also Purchased:


Recently Viewed: