Doug Fleenor Ethernet Control Relay Pack - 120VAC Input and Output w/ 1 Channel - 20A

The E1REL20A uses ArtNet and sACN (E1.31) Ethernet protocols for control of a relay. The relay can switch up to a 20 amp line voltage load and is built with a 30 amp relay for robust performance. The unit is provided with two 18" 12/3 SJ pigtails for line in and switched line out. Supplied with 15 amp parallel blade connectors as standard, the unit may be wired with higher rating connectors by special order or may be rewired by the customer.

Specifications:

• Certification: ETL Listed to the UL 508 standard.
• Input signal: E1.31 sACN and ArtNet
• Input circuit: 100BASE-TX Fast Ethernet, Crossover Detection
• Input connector: Neutrik Ethercon
• Power input: 100 to 132 Volts, 50/60 hertz, 4 watts (plus load)
• Power input plug: NEMA type 5-15P dead front plug standard, others optional
• Power output: Input power is switched to output (Hot leg only)
• Power output socket: NEMA type 5-15R dead front receptacle standard, others optional
• Output rating: 15 amps with standard connectors, 20 amps with optional connectors
• Output device: Omron G8P Relay.

Mechanical life:

• 10,000,000 operations minimum
• Electrical life: 250,000 operations minimum at 5 Amps
• 125,000 operations minimum at 20 Amps

Color:

• Top, bottom, and sides: Silver hammertone
• Front and back: Black

Size and Weight:

•  1.7”H × 6.5”D × 6.5”W, 2.7 pounds (19” rack adapter available)