$page_name : product
Large screen
Medium Screen
Small Screen
Extra Small Screen

Dynacord DSP Power Amplifier 2x950W Install w/ FIR Drive and Phoenix Connectors

Part Number: Dynacord C1800FDI-US

Appears in: Dynacord
This Item Ships FREE *
$929.00

Add to Cart

Dynacord DSP Power Amplifier 2x950W Install w/ FIR Drive and Phoenix Connectors

DYNACORD C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Integrated digital signal procesing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For low cost of ownership a power saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.

Features:

  • Installation DSP amplifier, Euroblock connectors
  • Fully integrated professional speaker processing with FIR Drive technology
  • Professional acoustic performance and rock-solid reliability
  • Low-Z and 70/100V operation and power saving standby mode
  • Powerful and proven audio performance
  • Engineered for constant stability at 2 Ohms
  • Low- and high-impedance outputs and remote GPIO control
  • Highly efficient standby power mode reduces running costs and power consumption up to 90%
  • Sophisticated protection circuitry always protects the amplifiers and connected loudspeakers
  • High-performance bulletproof voltage handling
  • On-board DSP includes multi-band PEQs, crossovers, limiters and delay per channel; True channel grouping control with extra DSP capabilities including GEQ
  • Intuitive, powerful control software makes configuration and real-time control easy. Up to 16 amp channels can be controlled and monitored simultaneously
  • Advanced FIR drive to optimize loudspeaker settings, providing premium features into an installation form factor
  • Engineered in Germany

Specifications:

  • Load Impedance 2 Ohms
    • 2.6 Ohms
    • 4 Ohms
    • 8 Ohms
  • Maximum Output Power
    • Single Channel
      • 2 Ohms: 1600 W
      • 2.6 Ohms: 1300 W
      • 4 Ohms: 950 W
      • 8 Ohms: 480 W
    • Dual Channel
      • 2 Ohms: 1400 W
      • 2.6 Ohms: 1200 W
      • 4 Ohms: 850 W
      • 8 Ohms: 450 W
    • Bridged
      • 70 V: 600 W
      • 100 V: 1250 W
      • 4 Ohms: 2800 W
      • 8 Ohms: 1700 W
  • Impedance
    • High-Impedance Operation: 70 V, 100 V
  • Maximum RMS Voltage Swing
    • 65.1 V
  • Voltage Gain
    • 32.0 dB (ref 1 kHz)
  • IMD SMPTE
    • IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
  • DIM 30
    • < 0.05% (3.15 kHz, 15 kHz)
  • Maximum Input Level
    • +21 dBu
  • Crosstalk
    • < -80 dB (ref. 1 kHz, at 100 W / 4 Ohms)
  • Frequency Response
    • 10 Hz to 21 kHz (±1 dB)
  • Input Impedance
    • 20 kOhms
  • Signal-to-Noise Ratio (SNR)
    • >105 dB (A-weighted)
  • Output Noise
    • < -68 dBu (A-weighted)
  • Total Harmonic Distortion
    • < 0.05% (at 600 W / 4 Ohms MBW = 80 kHz, 1 kHz)
  • Topology
    • Class-AB
  • Signal Processing
    • FIR filters
    • Audio limiters
    • Output delay per channel
    • 31-band GEQ per channel
    • PEQ per channel
    • Load impedance
  • Protection
    • Audio limiters
    • High temperature
    • DC
    • HF
    • Back-EMF
    • Peak current limiter
    • Inrush current limiters
    • Turn on delay
  • Cooling
    • Front-to-rear, 3-stage fans
  • Safety Class
    • I
  • Color
    • Black
  • Operating Temperature
    • 40 to 105°F / 4 to 41°C
  • Power
    • Power Requirement: 120 VAC, 60 Hz
    • Power Consumption: 700 W (1/8 maximum output power @ 4 Ohms)
    • Mains Fuse: T20AH
  • Dimensions
    • (H x W x D) 3.5 x 19.0 x 18.2" / 88.9 x 482.6 x 462.3 mm
  • Weight
    • 33.5 lb / 15.2 kg
Overview:

Related Items & Accessories