ETC ColorSource Spot Light Engine - Black (CSSPOT)

The Original Array uses an RGB-L array where the B represents the use of blue LEDs.  This array gives you access to the lighter blues and greens within the spectrum. 

The ETC ColorSource Spot brings together the affordability of a four-color light engine with the build-quality and support of an ETC product. Using a unique mix of red, green, blue, and lime LED emitters the ColorSource spot allows for an amazing range of color and depth unlike other low-cost LED fixtures. Because it utilizes standard ETC optics, adapters, and accessories it is a versatile solution for any lighting need.

The ColorSource Spot outperforms other four-color LED profiles thanks to its precise combination of red, green, blue, and lime emitters. ETC applied its extensive color-mixing knowledge to the ColorSource Spot to ensure that it can achieve brighter, richer, and more believable colors than other budget LEDs. And it accepts all the Source Four LED accessories, zoom and fixed-focus lens tubes, and CYC and Fresnel adapters.

Features:

• RGB-L array (Red, Green, Blue, and Lime)
• Simple user interface with seven-segment display
• PowerCon in and thru
• DMX/RDM in and thru (5-pin XLR or RJ45)
• LED droop compensation
• Optically calibrated
• Tour-ready, aluminum housing

Specifications:

• General:
  • ETL Listed to UL1573: the standard for stage and studio lighting units
  • IP20-rated for indoor use
  • Power and DMX in/thru connections for easy setup
  • Simple seven-segment, three-button interface with easy access to 12 customizable presets and five sequences
• Physical:
  • Rugged, die-cast, all-metal housing
  • C-clamp included
  • Positive-locking double-clutch fixture body
  • Slot for glass or stainless steel patterns and soft-focus diffuser
  • Wide accessory slot with sliding cover for motorized pattern devices or optional iris
  • Hanging yoke standard. Optional yoke/floor-stand available
• Electrical:
  • 100VAC to 240VAC 50/60Hz universal power input
  • PowerCon power in and thru connections
  • Up to nine ColorSource Spot fixtures (15A max) may be linked via power thru connector (10 ColorSource Spot luminaires total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel
  • Consult breaker-trip curves when used with other equipment. Requires power from a non-dim source
  • Inrush:
    • 120V: 28A (First half-cycle)
    • 240V: 46A (First half-cycle)
• LED:
  • 20,000-hour LED life (20,000 hours to 70% intensity)
  • 60 Luxeon Rebel LED emitters
• Color:
  • Exclusive RGB-L color array
  • Brightness and color range unlike any other four-color system
  • Optical calibration for consistency from fixture to fixture
  • Droop compensation for consistent output and color accuracy
• Optical:
  • Use the included soft-focus diffuser for creating washes or soft light
• Control:
  • Available with DMX512 in and thru via five-pin XLR or RJ45 connectors (Termination Required)
  • Simple RGB control (IRGBS profile)
  • See DMX Control Table for additional information
  • 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming
  • RDM functionality for address and setting change
  • Local control of presets (12) and sequences (5)
• Thermal:
  • Ambient operating temperature of 32 degrees to 104 degrees F (0 degrees to 40 degrees C)
  • Active electronic thermal management for droop-free operation
  • Quiet fan cooling
  • Fixture is designed for continuous operation up to 104 degrees F (40 degrees C) ambient temperature and requires free flow of air around fixture housing

• Condition: New
• Coupons: Free ground shipping item *