MDG Me8 Octo High Output Fog Generator
Details
The Me8 Fog Generator was designed with safety and reliability in mind. It is capable of generating pure white non-toxic fog for as long as you have fluid (100% duty cycle). This generator is also equipped with the Automatic Purging SystemTM (APSTM) as a standard feature. This system purges the heating module after the first heating cycle and after every emission of fog preventing residual build up and clogging.
At the heart of the MDG Me8 is an electronic assembly that keeps the heat exchanger at a very stable temperature with 3 different types of fail-safe systems. Those 3 types of electronic fail-safe systems are designed to protect against over and under-heating conditions and against component failure. When an overheating condition is detected, or if the internal temperature of the generator reaches 60 degrees C (140 degrees F), a safety circuit is triggered. This circuit removes the power to the heating elements preventing hazardous conditions. When an under-heating condition occurs the generator will stop producing fog until the temperature of the heating module is back within parameters. A fourth safety system consists of a pressure relief valve which limits the working pressure and protects against over-pressure.
Features:
Data_Sheet_97926_File_2.pdf
Product_Quick_Start_98002.pdf
User_Guide_98002_File_1.pdf
At the heart of the MDG Me8 is an electronic assembly that keeps the heat exchanger at a very stable temperature with 3 different types of fail-safe systems. Those 3 types of electronic fail-safe systems are designed to protect against over and under-heating conditions and against component failure. When an overheating condition is detected, or if the internal temperature of the generator reaches 60 degrees C (140 degrees F), a safety circuit is triggered. This circuit removes the power to the heating elements preventing hazardous conditions. When an under-heating condition occurs the generator will stop producing fog until the temperature of the heating module is back within parameters. A fourth safety system consists of a pressure relief valve which limits the working pressure and protects against over-pressure.
Features:
- With its 8 nozzles, the maximum fog output is 800 m3 (28,252 ft3) per minute
- 0-100% fog output control from your DMX/RDM device or direct local control
- 4-button LCD user interface, 3 standard USITT DMX512 channels, XLR-5 connectors, RDM compliant
- Reservoir capacity: 2.51 gallon (9.5L)
- Warm-up time: 8 minutes (max)
- Fluid type: MDG Neutral
- Operating voltage: 190 - 250 VAC, 50/60 Hz single phase
- Power consumption: 5 630 W
- Dimensions:
- Length: 28.7” (73cm)
- Width: 12” (30.4cm)
- Height: 16.3” (41.5cm)
- Weight: 100 lbs. (45kg)
- Shipping Weight: 132 lbs. with Flight Case (60kg)
- Approval: CE certified / CSA and UL approved
Data_Sheet_97926_File_2.pdf
Product_Quick_Start_98002.pdf
User_Guide_98002_File_1.pdf