Rosco OPTI-FLECS 9116 Double Hamburg Frost Min. Stop-Loss 0.2 13mil 30cm x 30cm
Details
Rosco 9116: Double Hamburg Frost Min. Stop-Loss 0.2 13mil 30cm x 30cm.
Description:
OPTI-FLECS is available in 21 standard diffusions and colors that are available in two standard sizes: 30cm x 30cm and 60cm x 60cm. The material is 13 mil (0.013 inches, .33mm) thick. The semi-rigid nature of the product offers a protected, reusable filter solution that can be inserted into a multitude of LED fixtures used on-stage, in broadcast studios or in architectural installations.
Specifications:
- Standard Dimensions:
- 60x60cm (23.6"x23.6")
- 30x30cm (11.81"x11.81")
- Thickness:
- 13 mil (0.013 inches, .33mm)
- Optimal Working Temperature Range:
- -35 degrees F - 240 degrees F (-37.2 degrees C - 115.6 degrees C)
Note: This product is intended for use on low-heat LED sources only, and is not suitable for use on high heat fixtures. OPTI-FLECS filters are designed to be installed externally and are not intended to be used as an internal fixture component where higher operating temperatures may be present.
- Product Installation:
- For best results, install the filter as far away from the emitter as possible.
- Install the diffusions with the smooth side facing the source.
- Care & Maintenance:
- Color filters and Powder Frost may be cleaned with mild soap and clean water.
- Other diffusions may be cleaned with mild soap and clean water on smooth side.
OPTI-FLECS_Description_Details_90062_File_1.pdf
OPTI-FLECS_Data_Sheet_90062_File_2.pdf